How to Switch Cosmetic Manufacturers Without Losing Your Formula

Switching cosmetic manufacturers? Learn who owns your formula, what a transfer pack needs, and how to move production in NZ or Australia without a quality dip.

Yes, you can switch cosmetic manufacturers, but only smoothly if you own your formula and have it documented. A proper transfer needs the full formula with INCI list, process notes, specifications, stability data and batch records. Without these, a new manufacturer has to reverse-engineer your product, which takes months and rarely matches the original.

Most indie founders only think about switching when something goes wrong: a manufacturer raises its minimums, misses deadlines, or closes its books to small brands. That is the worst moment to discover you don't actually hold your own formula. This guide explains what to check before you move, and what a clean handover looks like in New Zealand and Australia.

Who owns the formula when you work with a manufacturer?

It depends entirely on the agreement, and it is the first thing to confirm. Many contract and private label manufacturers keep the formula as their own intellectual property. You buy finished product, but the recipe stays with them, so leaving means starting from scratch with a new formulation brief.

At The INCI Lab, The Visionary pathway transfers full IP to you before manufacturing begins. On The Accelerator, your brand owns the finished SKU. Whatever route you choose, get ownership in writing and ask what you receive on day one, not what you can request later.

What should a formula transfer pack include?

A transfer pack is the set of documents that lets a second manufacturer reproduce your product without guessing. At minimum, ask for:

  • The full formula with percentages, supplier and grade for each raw material, and the INCI list as it appears on your label.
  • The manufacturing process: order of addition, temperatures, mixing speeds and times, homogenising steps, cooling profile and final pH.
  • Finished product specifications: appearance, viscosity, pH range, colour and odour standards, and acceptance limits.
  • Stability and preservative efficacy results for the current pack, so you know what was already proven.
  • Safety documentation such as your product information file and safety assessment.
  • Retained batch records and a reference sample from a batch you were happy with.

If your current manufacturer will not release these, that is useful information in itself. It usually means a re-formulation is the realistic path, and it is better to know that before you commit to a timeline.

Already hold a complete, documented formula? Our Formula Supplied service reviews it, makes samples in our Auckland lab and takes it through to small-batch production.

Why can a transferred formula behave differently?

The same recipe can behave differently on different equipment. Emulsions are the classic case: viscosity, droplet size and stability depend on mixer type, shear, batch size and cooling rate, not just the ingredient list. A lotion that is silky from a 20 kg lab-scale vessel can come out thinner or grainier from a 500 kg tank.

Raw material sourcing matters too. Two grades of the same INCI name, such as different emollient esters or thickeners, can feel noticeably different. This is why a transfer should always include a small pilot batch, side-by-side comparison against your reference sample, and a fresh stability check on the first production batches.

What are the steps to move production safely?

Plan for a structured handover rather than a quick swap. A practical sequence looks like this:

  1. Audit what you hold. List every document above and mark what is missing.
  2. Confirm IP and exit terms with your current manufacturer, including any stock, packaging and raw material you have paid for.
  3. Choose the new partner based on MOQ, capability for your product type, and willingness to work from your documents.
  4. Run a pilot batch and compare it to your reference sample for texture, pH, viscosity, scent and appearance.
  5. Repeat stability and preservative efficacy testing on the new-site product, particularly if equipment, batch size or any raw material grade changed.
  6. Update your compliance records so labels, safety documentation and batch records reflect the new manufacturer.
  7. Switch over gradually, using up remaining stock before the new batches ship.

What do NZ and Australian regulations expect when manufacturing changes?

In New Zealand, cosmetics are regulated under the Hazardous Substances and New Organisms framework, and the EPA's Cosmetic Products Group Standard sets out the ingredient and labelling requirements your product must meet. In Australia, the Australian Industrial Chemicals Introduction Scheme (AICIS) governs the industrial chemicals in cosmetics, and the brand or importer carries responsibility for introduction obligations. Always check the current rules with the regulator before launch.

A change of manufacturer does not rewrite the rules, but it does change your paperwork. Good manufacturing practice (commonly aligned to ISO 22716) is the standard many retailers and export markets expect, so ask any new partner how they document batches and manage change control. If you sell into the EU, UK or US as well, our guides on exporting to the EU and UK and the United States cover what changes there.

When is it smarter to reformulate than transfer?

Sometimes the honest answer is to rebuild. If your current formula is poorly documented, uses ingredients that are hard to source, or has a stability history you cannot verify, a fresh formulation on a documented process can be cheaper than months of chasing a faithful copy. That route also lets you fix issues you have lived with, such as a heavy feel or short shelf life, and you finish with a formula you own outright.

For brands that need a quick check first, Ask The Chemist is a 30-minute consult at $150 where a cosmetic chemist can review what you hold and tell you which route fits. Our services start with MOQs of 100 to 500 units, and Ready-to-Go bases are an option when speed matters more than a bespoke formula.

Frequently asked questions

Can I take my formula to another manufacturer?

Only if you own it or your agreement permits it. Check your contract for IP and exit terms first. If the manufacturer owns the formula, you may need to reformulate.

How long does a manufacturer switch take?

With a complete transfer pack, expect a pilot batch, comparison and stability checks before full production, often several months in total. Without documents, plan for a re-formulation timeline instead.

Will my product look and feel the same after a transfer?

It should be close, but equipment, batch size and raw material grades can change texture and viscosity. A pilot batch compared against a reference sample is how you confirm it.

Do I need to repeat stability testing after switching manufacturer?

Usually yes, at least on the first production batches, because the process and equipment have changed. Preservative efficacy testing is also worth repeating if any ingredient grade or pack changed.

What if my current manufacturer won't release my formula?

Review your agreement, then consider a new formulation built to match your product's performance. Starting with a formulation brief and owning the IP from day one avoids the same problem later.

Can The INCI Lab take over an existing product?

Yes, we can review your documents, assess stability and compliance, and recommend whether to transfer or reformulate. Get in touch to talk through your situation.

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.